Fox CTD DPS Volume Spacers / Tokens

€4.99

Fox CTD DPS Volume Spacers / Tokens

Priced as per each single item

Description

Please note: These are sold as singles as you can only ever fit one inside the air can, this will save having to buy a set of 5, thus saving you money!

Fox on the other hand only sell in packs of 5!

Fox CTD DPS Volume Spacers aftermarket equivalent to Fox pn 803-01-250 for 9mm shaft

***Please read below if you have a CTD shock****

Volume spacers will increase the spring curve of your rear shock making it stiffer at the end of the stroke.

The increased spring curve will help prevent progressing through the travel too quickly and the shock bottoming out.

These parts are 3D printed from a high quality chemical and oil resistant polymer – petg, which is used for drinks bottles, chemical containers, fuel tanks etc. We do not use pla in any of our 3D printed products.

 

These volume spacers are available in 5 sizes the largest is at the top of the list:

  • Size 5 – 0.95in3 equivalent to Fox pn 233-00-354 (cannot be fitted to older ctd shocks)

  • Size 4 – 0.8in3 equivalent to Fox pn 233-00-353 (cannot be fitted to older ctd shocks)

  • Size 3 – 0.6in3 equivalent to Fox pn 233-00-352

  • Size 2 – 0.4in3 equivalent to Fox pn 233-00-351

  • Size 1 – 0.2in3 equivalent to Fox pn 233-00-350

 

If you have a CTD rear shock and the eyelet measures 46mm in diameter on the thinnest part of the eyelet, then sizes 5 and 4 will not fit. However, sizes 1, 2 and 3 will. Later shocks have a bigger eyelet casting.

Size:
Quantity:
Add To Cart

Fox CTD DPS Volume Spacers / Tokens

Priced as per each single item

Description

Please note: These are sold as singles as you can only ever fit one inside the air can, this will save having to buy a set of 5, thus saving you money!

Fox on the other hand only sell in packs of 5!

Fox CTD DPS Volume Spacers aftermarket equivalent to Fox pn 803-01-250 for 9mm shaft

***Please read below if you have a CTD shock****

Volume spacers will increase the spring curve of your rear shock making it stiffer at the end of the stroke.

The increased spring curve will help prevent progressing through the travel too quickly and the shock bottoming out.

These parts are 3D printed from a high quality chemical and oil resistant polymer – petg, which is used for drinks bottles, chemical containers, fuel tanks etc. We do not use pla in any of our 3D printed products.

 

These volume spacers are available in 5 sizes the largest is at the top of the list:

  • Size 5 – 0.95in3 equivalent to Fox pn 233-00-354 (cannot be fitted to older ctd shocks)

  • Size 4 – 0.8in3 equivalent to Fox pn 233-00-353 (cannot be fitted to older ctd shocks)

  • Size 3 – 0.6in3 equivalent to Fox pn 233-00-352

  • Size 2 – 0.4in3 equivalent to Fox pn 233-00-351

  • Size 1 – 0.2in3 equivalent to Fox pn 233-00-350

 

If you have a CTD rear shock and the eyelet measures 46mm in diameter on the thinnest part of the eyelet, then sizes 5 and 4 will not fit. However, sizes 1, 2 and 3 will. Later shocks have a bigger eyelet casting.

Fox CTD DPS Volume Spacers / Tokens

Priced as per each single item

Description

Please note: These are sold as singles as you can only ever fit one inside the air can, this will save having to buy a set of 5, thus saving you money!

Fox on the other hand only sell in packs of 5!

Fox CTD DPS Volume Spacers aftermarket equivalent to Fox pn 803-01-250 for 9mm shaft

***Please read below if you have a CTD shock****

Volume spacers will increase the spring curve of your rear shock making it stiffer at the end of the stroke.

The increased spring curve will help prevent progressing through the travel too quickly and the shock bottoming out.

These parts are 3D printed from a high quality chemical and oil resistant polymer – petg, which is used for drinks bottles, chemical containers, fuel tanks etc. We do not use pla in any of our 3D printed products.

 

These volume spacers are available in 5 sizes the largest is at the top of the list:

  • Size 5 – 0.95in3 equivalent to Fox pn 233-00-354 (cannot be fitted to older ctd shocks)

  • Size 4 – 0.8in3 equivalent to Fox pn 233-00-353 (cannot be fitted to older ctd shocks)

  • Size 3 – 0.6in3 equivalent to Fox pn 233-00-352

  • Size 2 – 0.4in3 equivalent to Fox pn 233-00-351

  • Size 1 – 0.2in3 equivalent to Fox pn 233-00-350

 

If you have a CTD rear shock and the eyelet measures 46mm in diameter on the thinnest part of the eyelet, then sizes 5 and 4 will not fit. However, sizes 1, 2 and 3 will. Later shocks have a bigger eyelet casting.